Home > Brass - New or Once Fired > 6.8 SPC Brass
Sort By:
Page of 1
Starline 6.8mm Remington SPC 100 Pieces - Small Primer Sellier & Bellot 6.8 SPC Primed Brass New 250 Pieces - Small Primer Sellier & Bellot 6.8 SPC Primed Brass New 500 Pieces - Small Primer
Starline 6.8mm Remington SPC 100 Pieces - Small Primer
List Price: $45.00
Our Price: $35.00
Savings: $10.00
Sellier & Bellot 6.8 SPC Primed Brass New 250 Pieces - Small Primer
List Price: $119.00
Our Price: $109.00
Savings: $10.00
Sellier & Bellot 6.8 SPC Primed Brass New 500 Pieces - Small Primer
List Price: $235.00
Our Price: $212.50
Savings: $22.50
100 count new Starline Brass - Unprimed
From the Starline website:

The 6.8 SPC was designed for the military as a cartridge that landed between the 5.56mm NATO and the 7.62mm NATO to be used in the AR-15/M-4 platform. It loses very little magazine capacity versus the 5.56mm (25 vs. 30 rounds), but has better knockdown power without much more recoil.

This caliber works very well in short barreled rifles and is an easy conversion for an AR-15, requiring only a barrel, bolt, and magazine swap.

For someone looking for an AR-15 for hunting, this caliber is a logical choice, especially for recoil-sensitive shooters.

Our brass is safe to use in both 6.8 SPC and 6.8 SPC II chambers.
250 count Sellier & Bellot new 6.8 SPC primed brass.
This is 1st quality brand new brass from S&B in the Czech Republic.
Not pulls, not seconds, this is brand new right off the production line.
S&B brass is the best brass for use in the 6.8 SPC.
This brass works for either SPCII or SPCI loading.
Here are the advantages for using S&B brass:
  • The largest case capacity of any 6.8 SPC brass
  • The strongest brass alloy
  • Strongest casing in the unsupported area of the case
  • Strongest primer pockets
  • Most precise primer flash holes
  • Mirrors Lapua brass in quality
  • Highest quality control of any 6.8 brass
  • Ability for the fastest loads in new brass due to largest capacity
  • Less case stretch = less trimming
This item must ship UPS Ground - ORM-D. An additional $5.00 surcharge is added to shipping at checkout.
500 count Sellier & Bellot new 6.8 SPC primed brass.
This is 1st quality brand new brass from S&B in the Czech Republic.
Not pulls, not seconds, this is brand new right off the production line.
S&B brass is the best brass for use in the 6.8 SPC.
This brass works for either SPCII or SPCI loading.
Here are the advantages for using S&B brass:
  • The largest case capacity of any 6.8 SPC brass
  • The strongest brass alloy
  • Strongest casing in the unsupported area of the case
  • Strongest primer pockets
  • Most precise primer flash holes
  • Mirrors Lapua brass in quality
  • Highest quality control of any 6.8 brass
  • Ability for the fastest loads in new brass due to largest capacity
  • Less case stretch = less trimming
This item must ship UPS Ground - ORM-D. An additional $5.00 surcharge is added to shipping at checkout.